System Specifications

The following is a listing of the basic and standard control functions. You can view all of the Tri-Turn's standard and optional features, and detailed specifications by clicking on the following link to get the entire document.

  

The Tri-Turn specifications is a PDF (Portable Document Format) and requires Adobe Acrobat Reader to view and print. If you do not have the program, please click the following to download it for free.


 

Basic Control Functions

Control architecture: Open systems 160i-T

Operation capability: Three independent program paths

Controlled axis: Up to four per program path

Controlled spindles: Six (Main spindles driven together)

Least input increment: 0.001mm / 0.0001 inch

Dimensioning systems: Absolute / incremental programming

Feedrate command: F4-digit direct designation

Auxiliary functions: S4-digit (Direct command of spindles), T2-digit (Tool selection) + TS digit (Tool offset), M2-digit (00-99)

Feed motors: AC servo motors with absolute encoders, Slides: a6/3000 (upper X and cutoff w/ brakes), Counter spindle thrust: a12/3000

Power requirement: AC 230V + 10%-15%, 3 phase, 60 Hz A 1H

Standard Control Features
Window NT® operator interface
Color 10.4” LCD Touch Screen
Conventional MDI keyboard
Operator’s panel with discrete keys
Program number search
Sequence number search
Inch / metric conversion
Single block
Stored stroke check		 Position 3 upper counter spindle synchronized
Program paths wait for spindle carrier index
Reference position return: G28
Reference return check: G27
Rapid traverse override: MIN., 25, 50, 100%
Optional block skip: 1 piece		 Coordinate system setting
Chamfering/corner radius
Canned cycles
Multiple repetitive cycles: G70-G76
Radius designation on arc
Tool offset memory: 16 pairs
Tool offset
Tool nose radius compensation		 Tool geometry/wear compensation
Spindle offsets
Input of offset value measured B
Part program storage length: 80m
Registered programs: 63 pcs
Part program editing
RS 232C interface
PMC-SB6
     

216.265.7444 • 216.383.4444

info@triturn.com